WARREN HILL

0 Gauge BR Eastern Region GE Section

OWNER

Terry Cooke..............E mail Terry @13-fifty.com

Tel 01638 610522

I will (subject to other commitments) attend shows at short notice.

Layout Size 12' 6" x 2ft

Layout Footprint 12' 6" along the front and rear x 7' 6" in width to include stock tables
(7' 6" is the absolute minimum and a little more is always appreciated)

Viewing Height... 3' 4"

Operators... 2/3

Tables... Stock tables giving a 12' run required

Barriers... Yes please if available

Power Requirements... 1 x 13 amp socket (1200 W)

Expenses... Van + Fuel

Insurance value ... I self insure rolling stock through Magnet insurance so double insuring would be pointless. Public idemnity is not covered. I will require the layout, controllers and insurance excess to be covered, about 2000.00

Programme Notes

Warren Hill depicts a small ex Eastern Counties Railway station under British Railways auspices circa 1948/62. It appears to be the end of the line but in fact trains are reversed here to continue on to the end of the branch. Over time the station became more important than the actual terminus. Extra goods traffic for the large Agricultural engineering works being served by the goods yard and an off scene private siding. The colour scheme of the railway buildings is that of the LNER which became part of BR in 1948. There are still buildings displaying this colour scheme today some 60 years later. There is also evidence of the years when Warren Hill was part of The Great Eastern Railway, most of the steam locomotives originating from that company. The majority of buildings and rolling stock are kit or scratch built. The operating system is DCC


Exhibition Managers Please Note:

I am sorry but:-

There must be wheeled access to the hall and

under no circumstances will the layout and stock be carried up/down stairs. Single person/Wheelchair lifts are not adequate.

THIS IS NOT NEGOTIABLE